Basic Camera

Why does USB3 Vision in combination with Basler cameras offer a good real-time capability?
When talking about real-time capability there is the absolute latency time and there is a time jitter. The time jitter defines how much the time varies betw...
Wed, 28 Aug, 2019 at 5:31 PM
Basler area scan camera crop image in multi-location(multiple ROI)?
The answer is yes.  For Basler area scan camera, there is a function called "Stacked ROI" that allow you to do a selection on multiple Regions of...
Mon, 26 Aug, 2019 at 4:10 PM
How the color camera do the Bayer conversion?
For Bayer pixel format. If the color camera uses one of the Bayer pixel formats, it outputs 8, 10, or 12 bits of data per pixel. The pixel data is not proce...
Tue, 27 Aug, 2019 at 10:46 AM
What is the different between “C-Mount” and “CS-Mount”?
“C-Mount” lenses have a flange back distance of 17.526mm whereas “CS-Mount” have 12.5mm.  C-Mount lenses can be used on CS-Mount cameras by utilizing a 5m...
Wed, 18 Sep, 2019 at 1:46 PM
Can CS-Mount camera use C-Mount lens?
Can. Use an 5mm spacer ring together with the C-Mount lens and then connect to your camera.
Wed, 18 Sep, 2019 at 1:47 PM
What are the effects to the camera if the temperature of camera is above the operating temperature?
The camera can be operated above ambient temperature, but there'll be problems such as noise & malfunction. The noise is doubled for every 6 degrees...
Mon, 7 Oct, 2019 at 1:57 PM
Will device link throughput limit slow down the camera speed?
Question: Device link throughput limit: - Does it actually slow down the transmission speed between the camera and card? - i.e. does it use a slower freque...
Fri, 28 Feb, 2020 at 4:39 PM
Does Basler camera's IO have time delay function?
Question: - Does the camera's IO have a time delay function?  Answer: - Yes, there is a frame start trigger delay that allows you to specify a del...
Mon, 23 Mar, 2020 at 5:23 PM
What is the average and peak current consumption for acA1440-220uc?
Question: - What is the average and peak current consumption for acA1440-220uc?  Answer: For acA1440-220uc: - Average current consumption is 660mA -...
Tue, 24 Mar, 2020 at 10:12 AM
What is the min voltage for the input signal to trigger the camera?
Question: - What is the min voltage for the input signal to trigger the camera?  Answer: - For optocoupler input, min trigger voltage = 2.2V. - For GP...
Tue, 24 Mar, 2020 at 10:13 AM