Question:
- How to connect 5pcs acA1920-40um cameras to a system?
- Perform simultaneous capture, each camera is to snap 150x80mm FOV.
Answer:
- Suggest to use 2x USB3.0 Quad port card to connect all the 5 cameras together.
- For simultaneous capture, it is recommended to use hardware trigger signal instead of soft trigger. If you have no PLC or hardware trigger source. You may consider using 1 of the camera as Master, and the other 4 as Slave. (Connect Line Out from Camera 1 to Line In of Camera 1 to 5).
- Use end of exposure end to send out the signal to the next camera.