Camera cannot be triggered with the IO signal from Neousys IPC. : SODA VISION PTE LTD

Camera cannot be triggered with the IO signal from Neousys IPC. Print

Modified on: Mon, 23 Mar, 2020 at 5:14 PM

Issue:

- The camera cannot be triggered with the IO signal from Neousys IPC.

Solution:

- Suggest triggering the camera by using the isolated DIO.
-The root cause is due to a too high resistor is used.
- The maximum resistor that can be used is less than 1k ohm.

Did you find it helpful? Yes No

Help Desk Software by Freshdesk

Camera cannot be triggered with the IO signal from Neousys IPC. Print

Related Articles