To supply power to Gige camera, you have two options which are PoE or using 6 pin I/O cable.
Option 1 : Use PoE frame grabber
Normally, PC does not have PoE port . You need to have a PoE frame grabber to power GigE camera. I will suggest to use advantech PCiE 1672/ 1674 GigE frame grabber to power up your camera.
Option 2: 6 pins connector
You can power up your GigE camera using 6-Pin connector with 12V power supply.
You can connect grey wire to positive of power supply and yellow wire connect to negative of power supply.
After powered up your camera, you can go to pylon IP configuration to check whether the camera is connected.
